ALFA Romeo 156 JTS Performance camshafts

[E30 S50]

Hi All
Just fitted set of Colombo & Bariani camshafts to my 2004 156 jts, And its a new car still plenty of go down low but once it gets up around 4500 rpm it pulls like a train all the way to red line. still good idle and no ecu/software mods, $1550.00 landed here for the pair ,witch is the price of one standed cam here in aus,and as JTS engine are pron to wear out camshafts this is a great solution..

so happy had to let people know dont settle for standed cams

[E30 S50]

Cam specs

Application Road medium
Cam lift IN 11.2
Cam lift EX 10.4
Duration 270°/260°
Timing 20°-70° / 50°-30°
Timing with phase variator opened 45°-45° / 50°-30°
Lobe center angles 115°/100°
Lobe center angles with phase variator opened 90°/100°
Valve lift TDC 0.5 / 1.3
Valve lift TDC with phase variator opened 3.1 / 1.3
Clearance Hydraulic tappets

[shitbmxrider]

Dyno results?

[E30 S50]

its only my wifes daily driver so wont be going to dyno, save that sort of thing for my toys

[Tango]

I'm looking at doing the same thing as my cam lobes have worn on my JTS and it's quite noisy/rattly.
What else did you replace? Followers? Cam and Balancer belts and tensioners? How much did the labour set you back to have them fitted? Or did u do it yourself?
Thanks.

[E30 S50]

Hi
My was due for belts anyway so I did the lot also replaced the followers just to be safe,got all the parts ,belts,lifters,tensioners ,cams etc from uk landed here about 2800 the lot including the cams nearly half the price of buying the stuff here.I fitted them myself but I did the same job couple of weeks ago and I think I charged him about 8 hours for the whole lot,